-
Plastic Pipe Extrusion Line Maintenance Recommendations
Sep 13 , 2023
1、 Extruder If replacing new raw material, please make sure the current of the main machine reaches 60%-70% of the rated current, so that the raw material can be fully plasticized. During the process, please use the vacuum pump reasonably, the host current reaches 60% or more you can use the vacuum pump. You can observe the plasticizing condition of the material through the vacuum hole of the barr...
Read More
-
PE multilayer pipe line and its application
Sep 13 , 2023
PE multilayer pipe production line is mainly used to produce special-purpose pipes, the structure of the extruded multilayer pipe can be AB, ABA, ABC, etc. The whole production line is highly automated. The whole production line is highly automated, the operation and time of the production line are programmed and controlled by PLC, with good man-machine interface, all the process parameters can be...
Read More
-
What's PVC pipe extrusion line?
Sep 13 , 2023
PVC pipe extrusion lines includes four-outlet PVC pipe extrusion line, PVC double-outlet extrusion line and PVC single-outlet extrusion line. The applicable pipe diameter of each extrusion line is different, which should be choose according to the actual pipe diameters that need to be produced. PVC four outlet pipe extrusion line has the model of 16-32mm four-outlet PVC pipe extrusion line ...
Read More
-
What is PE/PPR Pipe Extrusion Line
Sep 13 , 2023
PPR pipe extrusion line includes 16-63mm, 20-110mm and 50-160mm PE/PPR pipe extrusion line. There are also PE large diameter pipe production line which includes 110-315mm, 315-630mm, 630-1200mm and 800-1600mm. The production lines are generally equipped with single screw extruder, co-extruder, pipe mould, vacuum calibration tank, water spraying cooling tank, hauler, cutter and stacker. The PE/PPR ...
Read More
-
What are the advantages of plastic extrusion
Apr 03 , 2024
Plastic extrusion is a popular high-volume production method that offers the perfect combination of versatility, flexibility, and consistency. Here are some of the main advantages of the extrusion process for plastic. Cost-Effectiveness: When compared with other processes, extrusion is quite cost-effective. Generally, plastic parts are developed with either injection molding service or extrusion...
Read More
-
How to Make a HDPE Pipe?
Jun 26 , 2024
HDPE pipe is a type of flexible plastic pipe used for fluid and gas transfer and is often used to replace ageing concrete or steel mains pipelines. Made from the thermoplastic HDPE (high-density polyethylene), its high level of impermeability and strong molecular bond make it suitable for high pressure pipelines. HDPE pipe is used across the globe for applications such as water mains, gas mains, s...
Read More
IPv6 network supported 
